Water-based primer suitable for most types of surfaces
Allows proper bonding with a single coat
For use on porous and non-porous surfaces
1-coat application for most surfaces!
No shot blasting or abrasion required
Tinted for ease of application
Suitable for installation with modified cement mortar and self-leveling underlayment's
Environmentally friendly- Low VOC, Waterbased with no hazardous air pollutants
Spread Rate: Coverage will vary with substrate porosity and condition. 300 Square feet per gallon is an average number with up to 800 square feet per gallon on previously sealed or non-porous surfaces.
Dry Time: Dry time will vary with application amount, substrate porosity, ambient temperature, and humidity, etc. A minimum of 30-60 minutes of dry time is recommended, with up to 4 hours preferred. The color will change from a purple tone to a more orange-brown color (the final color varies with substrate) as it dries. It is recommended to wait at least 30 minutes after a dry appearance before the application of adhesive..